• Provozní plány portálu Překlady her pro rok 2024

    31.3. přejde portál do režimu pouze pro čtení, tedy bude možné dála stahovat překlady, ale již nebude možné se registrovat a jakkoliv přispívat do diskusí kromě překladatelů
    31.12. dojde k ukončení provozu portálu Překlady her

    Za celý tým, který se od založení staral o tento portál, bychom vám chtěli poděkovat za vaši přízeň. Bylo to dlouhých 9 let našich životů. Všechno někdy končí, aby něco nového mohlo začít.
    Za mě jako provozovatele bych chtěl poděkovat všem lidem, kteří svojí prací přispěli k chodu celého portálu, všem překladatelům, kteří sem přispívali svými díly, a i vám všem, kteří jste se rozhodli nás, jakkoliv podpořit.

Tímto odkazem můžete nahlásit chybu:
https://prekladyher.eu/tikety/categories/pc-building-simulator-2.18/create

Každý kdo nahlásí alespoň jednu chybu do ticket systému, bude mít finální češtinu dříve než ostatní!
Zároveň Vás moc o pomoc s testováním a hledáním chyb v překladu. Hlavní administrátor nám založil vlastní sekci v ticket systému pro hlášení chyb v překladu.

Obrázkový návod na hlášení chyb: (pro zvětšení obrázků na ně klikněte)
1673171343433.pngScreenshot_9.png
Právě jsem na web nahrál testovací verzi češtiny!

Videonávod na instalaci češtiny vydám zítra!

Enjoy! A díky za případnou pomoc při nahlašování chyb či překlepů.

Krásný nový rok!
Pier_Park_Fireworks_43728086-5a93-4f8c-9aa8-9fb5ecffc27f.jpg
  • To se mi líbí
Reactions: MontyCZ
Překlad byl dokončen - to už víte.
Nyní díky uživateli @termit (jako vždy, díky!) máme i instalátor překladu do hry.
Z 4GB souboru, 700MB archivu jsme dokázali instalaci změnšit na pouhé 2MB.

Proto zítra během dne vydám verzi pro testování - díky za trpělivost ;)
Překlad byl úspěšně dokončen, ale ještě malou chvilku musíte počkat.

Probíhá testování a korekce překladu - to bude trvat znatelně méně než doba překládání 1-7 dní.
Ještě musím přijít na způsob jak vytvořit aplikátor, který bude snadno použitelný pro všechny uživatele a nebude mít 5gb.

Musím provést korekci sám po sobě, jelikož jsem si dělal po celou dobu překladu "jednoduché" poznámky.
Poté text přiletí všem zájemcům pro testování.
Screenshot_18.png
...další 2 nové aktualizace.

Už jsem se blížil k 91% překladu, ale náhle se objevil nový patch v1.1.08.
Oukej, během 2 hodinek jsem aktualizoval podklady a zajistil kompatibilitu překladu a překládal dále.
Bohužel, než jsem se dostal zpět, alespoň k 90% bylo to tu zas... před 12hod vyšel nový patch v1.1.09 a opět jsem musel češtinu předělat...

1671149870783.png
Vyšel nový update v1.1, který přidal do hry nových 700 řádků.


Nový motiv: Středověká dílna

Protože mnozí z vás očekávají sněhové kalamity, kde jinde hledat útočiště než doma v pohodlí virtuální dílny, která je zároveň středověkou pevností?
Screenshot_13.pngScreenshot_14.png

Vystupte na svůj právoplatný, nastavitelný a ergonomicky schválený otočný trůn a staňte se králem nebo královnou "castrum reparare". Vládněte místním šikulům s touto kustomizací hodnou slavnostního ceremoniálu, kterou lze nyní použít jak v režimu volné hry, tak v režimu kariéry.
Upozornění: Přikrývky a horké kakao jsou sice doporučeny, ale je třeba je zakoupit zvlášť.



Představení Endorfy
Rozšiřujeme náš rostoucí seznam partnerů a dnes vítáme značku Endorfy, která se zabývá výrobou skříní, chlazením, napájecích zdrojů a periferií! V této aktualizaci přidáváme výběr dílů této značky, včetně AIO Navis a PSU Supremo.

Screenshot_15.png
Na oslavu pořádá tým Endorfy také giveaway, takže se nezapomeňte podívat na jejich kanály sociálních médií.


Nová řada GPU: Intel ARC
S potěšením vítáme první projekt od Blue týmu v PC Building Simulatoru - pozdravte Intel Arc.
Screenshot_16.png
Grafické procesory Intel Arc řady A s kódovým označením Alchemist rozšiřují nabídku dedikovaných grafických procesorů o nedávno vydané modely Intel Arc A770 a Arc A750.


Přidané kousky, které byly žádané od fanoušků PCBS 2

Screenshot_17.png
Nvidia GeForce RTX™ 4090


Screenshot_18.png
AMD Ryzen™ 7000 Series

Screenshot_19.png
Intel® 13th Gen ‘Raptor Lake’


Kompletní seznam dílů:

CPUs:​


  • AMD Ryzen™ 9 7950X
  • AMD Ryzen™ 9 7900X
  • AMD Ryzen™ 7 7700X
  • AMD Ryzen™ 5 7600X
  • Intel® Core™ i9-13900K
  • Intel® Core™ i9-13900KF
  • Intel® Core™ i7-13700K
  • Intel® Core™ i7-13700KF
  • Intel® Core™ i5-13600K
  • Intel® Core™ i5-13600KF

GPUs:​


  • NVIDIA® RTX™ 4090
  • Intel® Arc™ A770
  • Intel® Arc™ A750

Motherboards:​


  • MSI MEG X670E GODLIKE
  • ASUS ROG Maximus Z690 HERO
  • ASUS ROG Strix Z690-I Gaming Wifi
  • ASUS ROG X570 Crosshair VIII Formula
  • GIGABYTE Z690 AERO D
  • GIGABYTE Z690I AORUS ULTRA PLUS
  • GIGABYTE X670E AORUS XTREME

Storage:​


  • Patriot VIPER VP4300 1TB

Liquid Coolers:​


  • Endorfy Navis F360 ARGB
  • Endorfy Navis F240
  • Endorfy Navis F280 ARGB

Air Coolers:​


  • Endorfy FERA 5
  • Endorfy FERA 5 ARGB
  • Endorfy FERA 5 DUAL FAN

PSUs:​


  • Endorfy Supremo FM5 Gold 1000

Case Fans:​


  • Antec Fusion 120mm ARGB Fan
  • Antec Storm 120mm Fan

Peripherals:​


  • Endorfy VIRO Plus Onyx White headset
  • Endorfy VIRO Plus Black headset
  • Endorfy Thock TKL Red keyboard
  • Endorfy LIX Plus mouse
  • Endorfy LIX Plus Onyx White mouse
  • Endgame Gear XM2w Wireless mouse

Cosmetic items:​


  • Overclockers UK Stickers
  • SteelSeries Posters
  • SteelSeries Stickers
  • Cells Posters

Bug Fixes​


General​


  • The price of custom water-cooled components now includes the price of ALL the used components in the inventory
  • Fixed an issue which caused the home button to incorrectly appear on top of tooltips when viewing the window through the decorator application
  • Fixed an issue which caused visual glitches between wall coverings and posters
  • Adjusted microphone location on the office desk to prevent collision with monitors
  • Prevented cable head mesh renderers from being turned off as part of the distance Culling System
  • Edited geometry of theme floors to prevent gaps appearing between floor and walls
  • 3DMark simulation now skips accurately when proceeding to the next day
  • Added a max GPU depth to case compatibility checks
  • Updated coolant meshes to improve visibility of coolant inside Watercooled GPU blocks
  • Added "Next" and "Previous" buttons to the Part Ranking app
  • Case fans that come with a case are no longer counted towards the total spent on the case
  • Made cable splitters auto add if using the auto cable tools, will remove the cable to make room for the splitter then plugs all the cables back in
  • Added Watercool RAM and Watercool GPU random jobs
  • Fixed an issue which could lead to randomly generated jobs displaying the wrong budget in their “spend no more than…” objective text
  • Improved the ability for randomly generated PCs to remove any cosmetic parts (e.g case beauty panels) if they are blocking other components
  • Changed "Current RAM Speed" to "Selected RAM Speed" in BIOS options
  • GPU Riser cables will now always choose the top available slot
  • Cables will now only trigger auto installation if there is no PSU mount for the case or after the PSU mount is installed
  • Fixed task ******* to be able to assign parts to jobs with more than one computer
  • Increased increments when using numpad + or - in BIOS options
  • Wireless mice will no longer incorrectly display wires on the main desk (ShopComputer Desk)
  • Ceiling lights for Futuristic Theme updated to use the correct lighting layer, this will prevent colour issues with lighting and coolant in PCs built when using this theme
  • Randomly generated jobs with “Use Case…” objectives have been updated to not include cases that are unavailable
  • Randomly generated jobs with “Overclock CPU…” objectives have been updated to not include motherboards which lack overclocking options
  • Motherboards now list how many PCI slots they have, and a filter has been added for this
  • GPUs now list the max amount of that GPU in one build, and a filter has been added for this
  • Made improvements to the system which highlights parts/objects during build mode process to more accurately match what is being highlighted

Parts​


  • Re-routed 24 pin for ASUS ROG ZENITH EXTREME in Lian Li O11D XL-X case to avoid clipping
  • Re-aligned fans on the EKWB EK-CoolStream SE 120 radiator
  • Re-routed CPU power cable for motherboards in In Win 309 case to avoid clipping
  • Improved Radiator/Case collision in NZXT H510i
  • Adjusted positions of fans on Alphacool Eisbaer LT92 CPU cooler
  • Aligned components of ASRock Z390 motherboard correctly
  • The water-cooled RTX 3090 FE and Raijintek Calore 360D are no longer compatible together inside the Fractal Design Meshify C case
  • Moved the power button cable in the Antec Dark Avenger DA601 case to not clip with SATA cables
  • Updated Cable pathing inside the Kolink Observatory cases to reduce SATA cable twisting, clipping and mess
  • Slowed animation of removing M.2 shield on MSI MEG Z690 UNIFY motherboard
  • Increased animation speed of drive bay opening on SilverStone CS381 case
  • Corrected chipset heatsink material of EVGA Z270 Classified K
  • Added more cable points so the cables don't clip with the Dark Base 700 cases
  • Added more cable points so the cables don't clip with the Cooler Master COSMOS C700P case
  • Added RGB to EKWB FC2080 RTX Classic D-RGB GPU block
  • Improved alignment of the EKWB FC2080 RTX Classic D-RGB GPU block on graphics cards
  • Fans of Alphacool Eisbaer LT series AIO CPU coolers are now aligned correctly
  • Corrected data for MSI GeForce RTX 2080 SUPER GAMING X TRIO
  • Allowed simultaneous installation of SSD and HDD in Antec P120 Crystal
  • Moved the position of the NVIDIA GeForce RTX 3090 GPU power connector
  • Added RGB to EKWB 1070-1070ti FCGeforce GTX FE RGB GPU block
  • Improved fidelity of the Alphacool Eiszapfen pipe fittings' engravings
  • Fixed cable slots on ASRock Z590 Gaming ITX TB4 Motherboard
  • Moved the position of the cables to be further into the Cooler Master MWE Gold power supplies
  • Added separate material for LED indicators on K60 RGB PRO keyboard
  • Adjusted the placement of larger PSUs inside the CORSAIR iCUE 5000T case to prevent clipping
  • Drive bay holders must now be installed before the trays on the CORSAIR iCUE 5000T case
  • Improved the ability of the be quiet! Pure Wings 2 120mm fans to connect to fan headers or other fans
  • Added more cable routing options to the cables connecting the top radiators to the motherboard in the CORSAIR 570X case
  • Added more cable routing options so the HDMI cables don't clip with the Dark Base 900 cases
  • Animated Power Switches have been added to the Cooler Master MWE Gold 850 V2, MWE Gold 750 V2, MWE Gold 650 V2 and MWE Gold 550 V2 PSUs when the PC is turned on
  • Improved the collision of the CORSAIR A500 Dual Fan to improve interactions with high-profile memory and CPU power connectors
  • Updated motherboard GPU slots first occupied slot to be correct in the Cooler Master MasterCase Maker 5t
  • Temporarily disabled EVGA GeForce RTX 2080 Super custom water cooling options.
  • Changed some cable points and changed cable rigidity to make bends a bit more aggressive in the Kolink Observatory Z case
  • Adjusted cable pathing in Fractal design torrent case
  • Moved the backplate of X570 Aorus Pro Wifi so it no longer clips through the motherboard
  • Fixed the collider on the be quiet! Dark base 900 case dust filter so case fans can be removed correctly
  • Added new font material and LCD elements to NZXT Kraken Z73 liquid cooler
  • Aligned EKWB 1070-1070ti FCGeforce GTX FE Silver GPU block placement on GPUs
  • Corrected the number of screws on the CPU cover on the NZXT N7 Z590 Motherboard
  • More GPU power cables are now available in Kolink Observatory Z case
  • More cables are available in Kolink Big Chungus case
  • More cables are available in InWin 309 case when using the MSI MAG B550M MORTAR WIFI
  • Moved fans down in the NZXT H500 case so it no longer clips through the top
  • Correctly set up UV channel on CORSAIR Carbide SPEC-06 RGB (Black) case for case customisation
  • Solid state drives in the Fractal Design Torrent case now install correctly when auto-cabling and manual cabling
  • Correctly set up UV channel on NZXT H510i (Black + White) case for case customisation
  • Added cable slot to SATA ports on MSI MEG Z690 Unify motherboard
  • 120mm fans can now be installed in the top slots of the Fractal Design Focus case
  • ASUS ROG ZENITH EXTREME M.2 Shields now correctly block the installation of M.2 drives if not moved first
  • Allowed zoom into the open bench table has been increased
  • Added additional cable routes to the Fractal Design Meshify 2 XL to allow 4 GPUs to be installed

Career Mode​


  • Increased budget of 2nd Portia Laperta job to $540. Players no longer receive a penalty for going over budget
  • Removed GPU length restriction on reservoir slot in the job's case

Onboarding​


  • Office PC can now be accessed at all times during the second day except when the actual painting of the case is taking place
  • The critical message that pops up when the shop front is unlocked now appears immediately
  • The action tip appearing on the monitor in GPU Overclocking onboarding now has no directional arrows
  • Added a tooltip to the rosette icon in the shop sales app to better explain its purpose
  • Allow tablet during steps of custom water cooling motherboard onboarding where the tablet can be allowed
  • Tutorial and/or control bars at the bottom left will no longer flicker when you move/perform actions

Localisation​


  • Character names and email addresses will no longer be localised in random job emails

PC Building Simulator 2 | Update v1.00.29

Přibylo 1300 řádků (2-denní úprava podkladů)

Screenshot_7.png

____________________________________________________​

ORIGINÁLNÍ TEXT UPDATU!​


Today’s v1.00.29 update is our last minor patch before Update 1.1 later this year. You can find a list of the addressed issues below. As always, we extend our thanks to the diligent community members who continue to report bugs and help provide evidence for issue replication/investigation!

General​


  • Lights now remember whether they were on or off when swapping decorations with the Decorator app
  • Fixed the depth buffer on futuristic wall style so that glass on PC cases renders correctly
  • Undo button is now restricted to the current mode, preventing issues where undo would jump into previous modes causing errors
  • Reintroduced H as a hotkey to hide the game UI
  • Wide-ranging improvements to water-cooling loops and their implementation

Metadata​


  • Fixed incorrect description for Ryzen™ 7 5800X3D and its Cinebench benchmarking data
  • Updated the benchmark data for the Radeon RX 5500XT, fixing incorrect assessment of the card in Will it Run
  • Corrected card length of MSI GeForce RTX™ 2080 SUPER™ VENTUS XS OC
  • Altered data for motherboard water blocks to compensate for increased overclocking headroom achievable with liquid-cooled VRMs
  • Fixed the EKWB FC2080 RTX™ Classic D-RGB GPU block's compatibility list
  • Corrected the GPUs that are compatible with the EKWB Vector 2080Ti RE water block

Jobs​


  • In the water cooling job ‘The ice man cometh!’, attached the Power Button cable to the front panel of the case to prevent issues occurring with power-ups enabled
  • The additional budget for RAM-based jobs has been decreased from 50% extra to 10% extra to be more realistic

Parts​


  • Improved collision accuracy on side panels and pump/reservoirs with HYTE Y60
  • Added generic case fans to the HYTE Y60
  • Added extra fan cables in InWin A1 case so all fans can be connected
  • Added extra cables to Fractal Design Torrent case so all fans can be connected
  • Improvements made to the pipe pathing on the Raijintek ERIS EVO case
  • Fixed BeQuiet PUREBASE 500 to fully support 3rd and 4th GPU slots
  • Updated side panels of the Fractal Design Meshify 2 XL Light Tempered Glass case to allow it to be cleaned with compressed air
  • Improved vertical GPU slot compatibility in Kolink Observatory Z and Z Mesh cases
  • Shortened pipes on AIO coolers in GSkill Z5i to improve compatibility
  • Added generic case fans to all Kolink cases
  • Improved the positioning of the PSU slot in the G.Skill Z5i Mini ITX case
  • Added extra cables to allow the connection of fans and radiators to the top of the Cooler Master MasterCase Maker 5t
  • AeroCool Aero One case is now correctly incompatible with coolers over 161mm in height
  • Pipe pathing for the Raijintek ENYO case has been improved
  • Improved GPU riser in SilverStone RZV03 case
  • USBs can now be inserted into the motherboard ports with the SilverStone FT05 case fully closed
  • Changed the ultrawide setting on the 43' DFL 16:9 monitor so content appears correctly
  • Fixed image alignment on the BenQ Mobiuz EX240 monitor
  • Removed overlapping collision from ASUS ROG Strix GeForce RTX™ 3090 024G GPUs
  • Updated the texture on EVGA GeForce RTX™ 2080Ti XC BLACK EDITION GAMING GPU to add Ti to the logo (and updated icon in the inventory)
  • Improved water block alignment on the EVGA GeForce RTX™ 2080Ti XC Black
  • Allowed M.2 with heatsinks to be used with the Gigabyte GA-B250M-Gaming 5
  • Removed duplicate CPU socket handle on the ASUS ROG Maximus X Hero (Wi-Fi AC) motherboard
  • Fixed top M.2 Slot of the MSI Z690 GODLIKE motherboard to accept Team Group Cardea SSDs
  • Improved alignment of M.2 slots on MSI MEG Z690 GODLIKE motherboard
  • Corrected the GPU slot ordering on the EVGA Z370 motherboard
  • Fixed green outline on ASRock TRX40 motherboard to include all the M.2 SSD cover
  • Removed 2nd reference to ASRock TRX40 Taichi motherboard when using the lighting app
  • Enabled all SATA ports and improved USB ports and M.2 slots on the ASRock TRX40 Taichi motherboard
  • Increased LED display brightness on ASRock TRX40 motherboard
  • Increased LED intensity on the MSI MPG Z690 CARBON WIFI motherboard
  • Improved alignment of the GPU on the ASUS ROG Strix X570-I Gaming motherboard
  • Improved SATA cables alignment on the NZXT N5 Z690 motherboard
  • Improved alignment of RAM and GPU on the NZXT N7 Z690 motherboard
  • Improved alignment of M.2 slots on ASRock B550 Steel Legend motherboard
  • Improved CPU alignment in the Asus ROG STRIX B550-F Gaming motherboard
  • Updated the texture on Ryzen™ 5 2600 CPU to be accurate
  • Changed DeepCool GAMMAXX 400 cooler’s texture so it no longer appears transparent
  • LEDs on NZXT Kraken X73 Pump now follow case rotation
  • Fixed the centre point of spinning fans on the Pure Loop 240mm AIO cooler

Localization​


  • Added Japanese, Simplified Chinese and Korean logos to the title, menu and loading screens when using those languages
  • Updated localization on EKWB 1070-1070ti FCGeforce GTX FE RGB, EKWB 1070-1070ti FCGeforce GTX FE Silver, Vector 2080Ti RE and EKWB FC2080 RTX™ Classic D-RGB water blocks
  • Fixed overlapping sender and date issues in the Email app’s Inbox view

Tutorials​


  • When loading back into a save with the Spares N Repairs tutorial PC on a desk, the desk is now highlighted correctly with other interactions disabled
  • RAM Timing tutorial tooltips now state the correct values
  • Tutorial for water-cooling a CPU skips the step of cabling if Auto Cable power-up is enabled
  • Improvements to case painting tutorial to prevent blockers
Rád bych vás informoval o příchodu nového člena do překladatelského týmu (kde jsem byl dosud sám :D)
Uživateli cimbalman87 jsem odeslal zkušební text, který přeložil na výbornou a krásně si pohrál s "USA" slovíčkařením a urban slangy a bez jakéhokoliv kontextu jeho překlad nevyžaduje žádnou úpravu z mé strany a může letět přímo do zdroje hry.

@cimbalman87 - díky za pomoc, určitě nejsem jediný kdo ti je a bude vděčný, až se překlad dokončí.​

Vyšel nový UPDATE v1.00.22

1. Co přibylo
Přibylo 88 řádků, kompletně mi to proházelo uspořádání společně s "indexem", který jsem tvořil 2 hodiny...
1667432995491.png


2. Třetina (1/3) textu za námi

Během krátké doby se mi podařilo přeložit pěkný kus textu
Screenshot_13.png
Screenshot_14.png

3. Změny

Bug Fixes​


Hotfixes (26 October)​


  • Fixed a situation where a specific cooler and a particular case could cause a save error.
  • Fixed an issue where players could not buy in bulk in the shop app.

General​


  • Fixed an issue where a PC's benchmark score could appear lower after placing it on sale in the Shop.
  • Added some logic to prevent players from cloning the wrong OS onto a customer's PC in Career Mode.
  • Fixed an issue where a PC could be generated for Spares'N'Repairs with a AIO clipping through the SilverStone PM01-RGB case.
  • Changes to memory settings in MSI BIOS now correctly wait for settings to be applied before frequency/timings are changed.
  • Fixed an issue where a PC could report "empty loop" when the system had in fact been filled with coolant correctly.
  • Reduced the number of instances which allow multi GPU setups to be created with GPUs clipping through each other.
  • Rebinding keys for Build Mode will no longer prevent players from removing parts, allowing them to progress as intended.
  • Changes to key bindings for the Install, Remove, Cable, Piping and Power buttons in Build Mode, will now be correctly represented in the UI.
  • Fixed an issue where using the Lighting app to configure a PC for sale in the Shop could result in it selling for less than expected when fitted with multiple GPUs.
  • Fixed an issue which caused the Office PC to accept inputs when players interacted with a PC on one of the workbenches.
  • Rigid pipes have now been unlocked at level 10, which should help with random water cooling jobs where a flexi pipe can't always find a route.
  • Players can now sell a 4th PC through the shop front without the PC getting 'stuck' or selling for an incorrect value.
  • Fixed an issue which could prevent the "Clear" button from clearing the paint from a case.
  • Fixed an issue which caused the custom water cooling shop to unlock on the tablet but not remain unavailable on the office PC.
  • Sound effects can no longer be heard when their volumes are set to minimum / off.

Parts​


  • Fixed an issue where a pump / reservoir and HDD could not always be installed together in the NZXT H440 case.
  • Fixed an issue where removing a 360mm radiator from the Open Benchtable case could result in a soft lock.
  • Fixed an issue which prevented fans, HDDs, and SSDs from properly connecting in the Cooler Master HAF 700 EVO.
  • USB ports on the Fractal Meshify 2 XL will now function as intended.
  • Fixed an issue with random job generation which prevented a radiator from being installed in the Kolink Stronghold Prime case.
  • Adjusted the collision of the Alphacool NexXxos ST30 280 radiator to allow installation in the Raijintek ERIS case.
  • Fixed incorrect control prompts displayed in Key bindings screen for Case Modding size and rotation.
  • Adjusted GPU placements on the MSI MEG X570 GODLIKE motherboard to prevent large GPUs being placed in ways which caused them to overlap.
  • The USB ports of the MSI MPG X570 Gaming Pro Carbon WIFI motherboard can now be used as intended.
  • The Front I/O of the Fractal Design Torrent can now be plugged in manually to the Motherboard.
  • Pump / reservoir will no longer clip through motherboards in the HYTE Y60 case.
  • Reduced the number of instances which cause parts to clip through fans on Raijintek Calore radiators.
  • Adjusted cable pathing on the Hyte Revolt 3 to reduce floating cables.
  • ASRock Intel Z590 Phantom Gaming-ITX/TB4 motherboard is no longer incorrectly labeled/sorted as LGA1151 instead of LGA1200.
  • HYTE Y60 case will no longer allow players to install radiators which are too long for the case.
  • Cases with support for two pump reservoirs will now allow the usage of both without incorrectly flagging the status as "empty loop".
  • Fixed a collision issue with some water-cooled RTX 3080 cards where water-cooling pipes could not be connected.
  • Memory frequencies for the RTX 3080/3090 ULTRA HYDRO COPPER GAMING GPUs have been corrected.
  • Improved pump/reservoir options for the Cooler Master HAF 700 EVO case.
  • Lighting spec is now correctly listed for the be quiet! Pure Loop series AIO coolers.
  • Case fans are now correctly included with the Cooler Master HAF 700 Evo case.

Localisation​


  • Fixed spelling and punctuation for some text shown when adding a waterblock to RAM in the watercooling bench mode.

Tutorials​


  • Fixed an issue where a second USB device could not be connected if a first one was preemptively installed during the GPU water cooling tutorial.
První ukázka češtiny (10%)

Pro zobrazení tohoto obsahu potřebujeme váš souhlas s nastavením souborů cookie třetích stran.
Podrobnější informace naleznete na naší stránce o souborech cookie.

//Ano ve videu je jeden překlep a jedna nepřeložená věta ;)
Vyšel nový UPDATE, který opravil mnoho chyb i překlepů v textu (chybějící otazníky či tečky na konci vět) atd...

Češtiny se to dotklo minimálně ze 120tis řádků (notepad++ 220tis. řádků) cca 500 změn. Bohužel v takovém množství se compare v notepad++ i v Excelu opravdu zapotil a z oprav pár řádků se stala několikahodinová prácička.

Zatím jsem na 6% překladu, ano, jde to pomalu. Kdyby se našel nějaký překladatel na volné noze, byl bych rád za každou pomoc ;)

Bug Fixes​


Hotfixes (13-14 October)​


  • Fixed an issue which prevented players from opening the tablet in the first Thermal App onboarding job.
  • Fixed an issue which caused some players to become soft locked when custom water cooling CPUs in other languages than English.
  • The tablet will now automatically close apps when stowed if an app is stopping it from being stowed during the onboarding process.
  • Fixed an issue with 3DMark being unable to finish if a codec playback error is encountered during 3DMark video playback.
  • Fixed multiple load/save issues when unlocking the shop and ending the day.
  • Fixed an issue which prevented achievements from unlocking correctly after an hour of play.
  • Renamed “Foxtrot” to “PC Building Simulator 2” on the Epic Games Store overlay.
  • Fixed PCs growing larger when picked up from a bench and resulting connected issues.
  • Fix multiple data issues.
  • Fixed various localisation issues.

General​


  • Fixed an issue with the award rosette/ribbon in the Shop Sales app.
  • Corrected a trigger which could incorrectly result in players being asked to complete the RAM basics tutorial when changing a PSU in some cases.
  • Fixed a potential softlock in the watercooling tutorial which asked players to fill the loop with coolant prior to finishing connecting the loop.
  • Fixed a potential softlock in the watercooling tutorial which asked players to drain the loop of coolant despite the loop already being drained and disconnected.
  • Improved the trigger and step advancement in the water cooling tutorial for steps related to connecting pipes.
  • Corrected a mistake in the Will It Run app 'The Loneliest Sharpshooter'.
  • The tutorial for watercooling memory will now correctly ask players to connect memory blocks to the resultant watercooling loop.
  • Fixed additional issues which lead to soft locks during the GPU water cooling tutorial.
  • Fixed an issue which caused player position to be adjusted in some rare instances when using the decorator app.
  • Prevented a number of issues which could soft lock players if they did not follow prompted directions during the store unlocking process.
  • Use of the tablet around the tablet introduction stage is now more intuitive.
  • Fixed an error in the details of the level 6 unlock email.
  • Fixed an issue which led to misalignment of the "Add to basket..." prompt when scrolling during the shop tutorial.

Jobs​


  • Fixed an issue which lead to the "More heat" multi-GPU job from "Bakerboyjoe" spawning with a power supply rated too low to power the system.

Parts​


  • MSI BIOS will now correctly display options to increase settings on parts such as CPU frequency and multiplier.
  • Fixed an issue which prevented players from connecting a keyboard and mouse to the computer when using a GIGABYTE Z590I Vision D motherboard.
  • Fixed an issue which prevented players from connecting a monitor to the computer when using a GIGABYTE Z590I Vision D motherboard.
  • Corrected a mistake in the text which indicated an incorrect number of CPU cores in the Ryzen 5900X processor.
  • Corrected a spelling mistake on the Alphacool Eisblock Plexi Light GFRTX 2080/2080Ti M02.
  • The NZXT N7 z690 motherboard supported memory speed has been adjusted to match its real life counterpart.
  • The ASUS ROG MAXIMUS z690 APEX motherboard’s supported memory speed has been adjusted to match its real life counterpart.
  • Added SLI bridge support for the Palit GeForce RTX 3090 Ti GameRock (OC) graphics card.
  • Fixed a number of cable clipping issues with the HYTE REVOLT 3 case.
  • Fixed an issue which prevented the display of the SteelSeries Qck Large Neo Noir edition mouse mat in the player inventory.
  • Side panels on the Cooler Master MasterBox NR200P (Sakura) will now spawn in the correct size.
  • Adjusted the power requirements for 5700 and 5700 XT cards.
  • The GIGABYTE z590 AORUS MASTER (rev. 1.0) motherboard supported memory speed has been adjusted to match it's real life counterpart
  • The GIGABYTE z590 AORUS MASTER (rev. 1.0) motherboard no longer incorrectly supports SLI.
  • The MSI MAG Z690 TOMAHAWK WIFI DDR4 motherboard supported memory speed has been adjusted to match its real life counterpart.
  • The NZXT N5 z690 motherboard supported memory speed has been adjusted to match its real life counterpart.
  • Corrected the default installation orientation of the Raijintek Calore radiator when using a Raijintek Paean case.
  • GPUs in the AMD Radeon 6000 series family can now have their settings adjusted correctly through GPU tuner e.g. for the purpose of overclocking.
  • The MSI MPG Z690 CARBON WIFI motherboard no longer incorrectly supports SLI.
  • The MSI MPG Z690 CARBON WIFI motherboard’s supported memory speed has been adjusted to match its real life counterpart.
  • The MSI MAG Z690 TOMAHAWK WIFI DDR4 motherboard no longer incorrectly lists RGB capabilities.
  • Fixed a mistake in text on the IHS of the Ryzen 5 2600.
  • Fixed an issue which prevented NZXT Aer case fans from unlocking as expected.
  • Players can now paint the top of the SilverStone PM01-RGB case as intended.
  • The USB ports on the top of the Cooler Master MasterBox NR200P (Sakura) will now allow insertion of USB devices as intended.

Localisation​


  • Improved the clarity of a number of translations related to job objectives in Japanese.
  • Adjusted the positioning and size of Polish text to prevent overlapping with several icons throughout the game.
  • Text related to email notification headers will now correctly be localised when playing with FR/DE/ES/PTBR/PL/RU/KO/JP/CN language settings.
  • Text related to selling through the store following the store unlocking trigger will now correctly be localised when playing with FR/DE/ES/PTBR/PL/RU/KO/JP/CN language settings.
  • Text in the fourth tab of the options menu will now correctly be localised when playing with FR/DE/ES/PTBR/PL/RU/KO/JP/CN language settings.
  • Adjusted the alignment of all non-English localisations on items with multiple lines of text displayed in menu options.
  • Text related to interactions with the PC Storage Cupboard will now correctly be localised when playing with FR/DE/ES/PTBR/PL/RU/KO/JP/CN language settings.
  • Fixed an issue which caused text to overrun in the Omega OS cloning installation menu when game language is set to a non English language.
  • Text related to job links when picking up an order will now correctly be localised when playing with FR/DE/ES/PTBR/PL/RU/KO/JP/CN language settings.
  • Fixed an issue which caused text to overrun in the customer satisfaction screen when game language is set to a non English language.
  • Fixed an issue which caused text to overrun in the customer satisfaction title when game language is set to a non English language.

Stay up to date!​

Právě běží sleva 10% na zakoupení PC Building Simulator 2 na Epic Games.
Já už ji mám, a co ty? :)
Screenshot_22.png
Screenshot_23.png
Back
Top